Effect of three metal priming agents on the bond strength of adhesive resin cement to Ag-Zn-Sn-in alloy and component metals

Abstract

The aim of this study was to investigate the effect of three metal priming agents on the bond strength of adhesive resin cement to Silver-Zinc-Tin-Indium (Ag-Zn-Sn-In) alloy and pure Ag, Zn, Sn, and In. The specimens were air-abraded with alumina and then primed with one of three metal priming agents: V-Primer, Estenia Opaque Primer, or Alloy Primer. The metal disks were bonded with adhesive resin cement (Super-Bond Bulk-mix technique). Shear bond strengths (n=10/group) were determined before and after 50,000 thermocycles for Ag-Zn-Sn-In alloy as well as after 5,000 thermocycles for pure Ag, Zn, Sn and In. For Ag-Zn-Sn-In alloy, the post-thermocycling bond strength of the Alloy Primer group was significantly higher than that of the other primers. It can be concluded that Alloy Primer containing both the vinyl-thione monomer (VBATDT) and hydrophobic phosphate monomer (MDP) is effective for bonding Ag-Zn-Sn-In alloy and pure Ag, Zn and Sn.