Abstract
We demonstrate the use of a compound optical cavity as linear displacement detector, by measuring the thermal motion of a silicon nitride suspended membrane acting as the external mirror of a near-infrared Littrow laser diode. Fluctuations in the laser optical power induced by the membrane vibrations are collected by a photodiode integrated within the laser, and then measured with a spectrum analyzer. The dynamics of the membrane driven by a piezoelectric actuator is investigated as a function of air pressure and actuator displacement in a homodyne configuration. The high Q-factor (∼3.4 · 10 4 at 8.3 · 10 â '3 mbar) of the fundamental mechanical mode at ∼73 kHz guarantees a detection sensitivity high enough for direct measurement of thermal motion at room temperature (∼87 pm RMS). The compound cavity system here introduced can be employed as a table-Top, cost-effective linear displacement detector for cavity optomechanics. Furthermore, thanks to the strong optical nonlinearities of the laser compound cavity, these systems open new perspectives in the study of non-Markovian quantum properties at the mesoscale.
Cite
CITATION STYLE
Baldacci, L., Pitanti, A., Masini, L., Arcangeli, A., Colangelo, F., Navarro-Urrios, D., & Tredicucci, A. (2016). Thermal noise and optomechanical features in the emission of a membrane-coupled compound cavity laser diode. Scientific Reports, 6. https://doi.org/10.1038/srep31489
Register to see more suggestions
Mendeley helps you to discover research relevant for your work.