Physical, Mechanical, and Thermal Properties of Heat-Treated Poplar and Beech Wood

Abstract

Air-dried density, weight loss (WL), impact bending strength (IBS), Shore-D hardness, and thermal conductivity values were determined for heat-treated poplar (Populus nigra L.) and beech (Fagus orientalis Lipsky) wood and compared with those for untreated samples. The test samples were heat-treated at 140, 160, 180, and 200 °C for 2 h. The results showed that density decreased and WL increased with increasing temperature for all temperatures. Additionally, during the heat treatment, the IBS increased in beech wood samples at 140 °C, but at higher temperatures, these values gradually decreased in both wood species. The highest decline in IBS values, found at a temperature of 200 °C, was 66.5% for beech and 55.7% for poplar. The Shore-D hardness of both wood species increased after heat treatment and regarding beech wood, the hardness increasing rate at temperature at 140 °C, 160 °C, 180 °C and 200 °C, 8.94%, 14.19%, 8.27% and 11.7%, respectively according to control samples. Regarding poplar wood, hardness increasing rates were 6.20% at 140 °C, 4.41% at 160°C, 5.88% at 180°C and 5.31% at 200°C according to control samples. The thermal conductivity of poplar and beech wood samples decreased after heat treatment, except for samples heat treated at 160 °C.