The influence of buffer composition on separation efficiency and resolution in capillary electrophoresis of 8-aminonaphthalene-1,3,6-trisulfonic acid labeled monosaccharides and complex carbohydrates

Abstract

The effect of buffer conditions - varying in salt type, pH, and concentration on the separation of 8-aminonaphthalene-1,3,6-trisulfonic acid (ANTS)-labeled monosaccharides and complex-type carbohydrates was investigated. Different buffer systems for high and low electroosmotic flow conditions were chosen: a phosphate and a citrate background electrolyte, each at pH 2.5, a phosphate buffer, pH 9.0, and a borate buffer at pH 9.5. All buffer systems displayed differences in resolution and selectivity. Phosphate and borate buffer demonstrated the greatest selectivity changes for ANTS-labeled carbohydrates. While separation in the phosphate system relies mainly on differences in the charge-to-mass-ratio, additional selectivity can be achieved with borate complexation of glycoconjugates. The use of borate buffers improved monosaccharide separations whereas complex carbohydrates showed a loss in resolution. The citrate background electrolyte at low pH caused no significant changes in the separation performance. The pH 9.0 phosphate buffer showed a reversed migration order of the ANTS conjugates with a decreased resolution, compared to the pH 2.5 phosphate buffer, due to the strong electroosmotic flow generated under high pH conditions. An ovalbumin-derived oligosaccharide library demonstrates the significance of buffer selectivity for complex carbohydrate separations. The separation in the acidic phosphate and the alkaline borate buffer generates a different pattern and only the combination of both buffer systems allows an appropriate assessment of sample complexity.