Removal of Model Aromatic Hydrocarbons from Aqueous Media with a Ferric Sulfate–Lime Softening Coagulant System

Abstract

The removal of model hydrocarbon oil systems (4-nitrophenol (PNP) and naphthalene) from laboratory water was evaluated using a ferric sulfate and a lime-softening coagulant system. This study addresses the availability of a methodology that documents the removal of BTEX related compounds and optimizes the ferric-based coagulant system in alkaline media. The Box–Behnken design with Response Surface Methodology enabled the optimization of the conditions for the removal (%) of the model compounds for the coagulation process. Three independent variables were considered: coagulant dosage (10–100 mg/L PNP and 30–100 mg/L naphthalene), lime dosage (50–200%), and initial pollutant concentration (1–35 mg/L PNP and 1–25 mg/L naphthalene). The response optimization showed a 28% removal of PNP at optimal conditions: 74.5 mg/L ferric sulfate, 136% lime dosage, and initial PNP concentration of 2 mg/L. The optimal conditions for naphthalene removal were 42 mg/L ferric sulfate, 50% lime dosage, and an initial concentration of naphthalene (16.3 mg/L) to obtain a 90% removal efficiency. The coagulation process was modeled by adsorption isotherms (Langmuir for PNP; Freundlich for Naphthalene). The surface properties of flocs were investigated with pHpzc, solid-state UV absorbance spectra, and optical microscopy to gain insight into the role of adsorption in the ferric coagulation process.