The three-loop pulley suture versus two locking-loop sutures for the repair of canine achilles tendons

Abstract

Objective - To compare a 3-loop pulley suture pattern with 2 locking-loop sutures for the repair of components of the canine Achilles mechanism. Study Design - In vitro biomechanical study. Animals - Forty-eight paired tendons collected from 9 canine cadavers. Methods - Paired tendons were repaired with either a 3-loop pulley suture or 2 locking-loop sutures and tensile tested to failure. To ensure accurate anastomosis gap measurement a direct, non-contact, method of gap measurement, using digital video, was devised. Load initiating gap formation (defined as load at a 1 mm gap) and load producing a 3 mm gap were evaluated in addition to maximum load, gap at failure, mode of failure, and time spent placing the sutures. Results - Maximum load values were similar for both repairs. The mean 1 mm gap loads were 44.0 and 18.4 N, and the mean 3mm gap loads were 56.3 and 34.7 N, for the 3-loop pulley pattern and the 2 locking-loops, respectively; these differences were statistically significant. The 3-loop pulley pattern was faster to place and resulted in a smaller gap at failure. All but 2 repairs failed by suture pull out. Conclusions - The 3-loop pulley pattern is more resistant to gap formation during tensile loading, and is quicker to place, than 2 locking-loop sutures. Clinical Relevance - Gap formation can significantly delay tendon healing. Tendon repairs with a gap > 3 mm are reported to be at increased risk of rupture during the first 6 weeks postoperatively. © Copyright 2004 by The American College of Veterinary Surgeons.