The Study on Physicochemical Characteristics of Wood Treated by Ultrasound-assisted Extraction

Abstract

To evaluate the influence of ultrasound-assisted extraction (UAE) on the physicochemical characteristics of wood, UAE and Soxhlet extraction (SE) were used to treat Eucalyptus. In UAE, ultrasound with a frequency of 40 kHz and an intensity of 360 W was performed at 60 °C for 30 min. Comparison of UAE samples with Soxhlet-extracted and untreated samples indicated that both the extraction and cavitation effects of ultrasound played a significant role in the efficient alteration of wood characteristics. Identification of extractives by gas chromatography-mass spectrometry (GC/MS) suggested the presence of more low- and highvolatility components in UAE, whereas SE mainly consisted of moderatevolatility components. In thermogravimetry (TG) analysis, UAE samples obtained the highest maximum mass-loss rate (-52.1%/min) at the lowest temperature (378.4 °C). Volatile profiles obtained by thermogravimetryinfrared spectroscopy (TG-FTIR) indicated that CO and CH4 increased, whereas CO2 and formic acid decreased during pyrolysis after UAE. The release of CO and methanol components was mainly influenced by extraction; however, the emission of CO2, CH4, and formic acid responded more strongly to the effects of ultrasound. Scanning electron microscopy (SEM) images revealed that the fracture of pit membranes and small protuberances on the surface of the residues reflected the effects of ultrasound.