Reduced-area constant-coefficient and multiple-constant multipliers for Xilinx FPGAS with 6-input LUTs

Abstract

Multiplication by a constant is a common operation for many signal, image, and video processing applications that are implemented in field-programmable gate arrays (FPGAs). Constant-coefficient multipliers (KCMs) are often implemented in the logic fabric using lookup tables (LUTs), reserving embedded hard multipliers for general-purpose multiplication. This paper describes a two-operand addition circuit from previous work and shows how it can be used to generate and add pre-computed partial products to implement KCMs. A novel method for pre-computing partial products for KCMs with a negative constant is also presented. These KCMs are then extended to have two to eight coefficients that may be selected by a control signal at runtime to implement time-multiplexed multiple-constant multiplication. Synthesis results show that proposed pipelined KCMs use 27.4% fewer LUTs on average and have a median LUT-delay product that is 12% lower than comparable LogiCORE IP KCMs. Proposed pipelined KCMs with two to eight selectable coefficients use 46% to 70% fewer LUTs than the best LogiCORE IP based alternative and most are faster than using a LogiCORE IP multiplier with a coefficient lookup function. They also outperform the state-of-the-art in the literature, using 22% to 57% fewer slices than the smallest pipelined adder graph (PAG) fusion designs and operate 7% to 30% faster than the fastest PAG fusion designs for the same operand size and number of selectable coefficients. For KCMs and KCMs with selectable coefficients of a given operand size, the placement and routing of LUTs remains the same for all positive and negative constant values, which is advantageous for runtime partial reconfiguration.