Role of the Potential Range during Stress Testing of Platinum-Containing Electrocatalysts at Elevated Temperature

Abstract

The durability of low temperature proton exchange membrane fuel cell (PEMFC) catalysts crucially affects their lifetime. The choice of carbon support is important in terms of increasing the stability of catalysts. In this research, Pt/C samples were obtained using the polyol synthesis method on two types of carbon supports: the standard support, Vulcan XC-72, and carbon support with a high degree of graphitization, ECS-002402. One method for assessing structural characteristics is through transmission electron microscopy (TEM), according to which materials G1 and G2 showed an average nanoparticle size of 3.7 and 4.2 nm, respectively. On all catalysts, the oxygen reduction reaction proceeded according to the four electron mechanism. Durability was assessed by changes in ESA and activity in the ORR after 1000 cycles, with changes in the upper potential values: 0.7; 1.0; 1.2; and 1.4 V. After accelerated stress testing, the G1 material showed the greatest residual activity at a potential of 1.4 V (165 A/g (Pt). Based on the results of comparing various ADT protocols, the optimal mode of 0.4 and 1.4 V was chosen, and should be used for further studies comparing the durability of Pt/C catalysts.