Erratum: Three-dimensional printing of ceramics through "carving" a gel and "filling in" the precursor polymer (ACS Applied Materials & Interfaces (2020) 12:28 (31984-31991) DOI:10.1021/acsami.0c08260)

Mohammadreza Mahmoudi; Chao Wang; Salvador Moreno; Scott R. Burlison; Diana Alatalo; Fatemeh Hassanipour; Samantha E. Smith; Mohammad Naraghi; Majid Minary-Jolandan

ArticleOPEN ACCESS

Erratum: Three-dimensional printing of ceramics through "carving" a gel and "filling in" the precursor polymer (ACS Applied Materials & Interfaces (2020) 12:28 (31984-31991) DOI:10.1021/acsami.0c08260)

ACS Applied Materials and Interfaces

DOI: 10.1021/acsami.0c13983

0Citations

7Readers

Abstract

Due to a production error in converting the Information, Figure S4 appears incorrectly. The Supporting corrected version is available with this correction. The change does not affect the scientific conclusions of the paper.

Cite

CITATION STYLE

APA

Mahmoudi, M., Wang, C., Moreno, S., Burlison, S. R., Alatalo, D., Hassanipour, F., … Minary-Jolandan, M. (2020, September 23). Erratum: Three-dimensional printing of ceramics through “carving” a gel and “filling in” the precursor polymer (ACS Applied Materials & Interfaces (2020) 12:28 (31984-31991) DOI:10.1021/acsami.0c08260). ACS Applied Materials and Interfaces. American Chemical Society. https://doi.org/10.1021/acsami.0c13983

Erratum: Three-dimensional printing of ceramics through "carving" a gel and "filling in" the precursor polymer (ACS Applied Materials & Interfaces (2020) 12:28 (31984-31991) DOI:10.1021/acsami.0c08260)

Abstract

Cite

Register to see more suggestions