Multi Objective Optimisation of Turning Process Parameters on EN 8 Steel using Grey Relational Analysis

  • Sridhar G
  • Venkateswarlu G
N/ACitations
Citations of this article
12Readers
Mendeley users who have this article in their library.

Abstract

The objective of the present paper is to optimize the machining parameters for turning of EN8steel on lathe machine using a combination of Taguchi and Grey Relational Analysis to yield minimum cutting forces and surface roughness. The process parameters such as rotational speed, feed, depth of cut and cutting fluid have been selected. In this study, the experiments were carried out as per Taguchi experimental design and L 9 orthogonal array was used. Analysis of variance (ANOVA) was also used to find out the most influence of processing parameters on the responses. The regression equations were also established between the process parameters and responses. The results indicate that the depth of cut is the most significant factor affecting the cutting force and surface roughness followed by a feed, speed and cutting fluid.

Cite

CITATION STYLE

APA

Sridhar, G., & Venkateswarlu, G. (2014). Multi Objective Optimisation of Turning Process Parameters on EN 8 Steel using Grey Relational Analysis. International Journal of Engineering and Manufacturing, 4(4), 14–25. https://doi.org/10.5815/ijem.2014.04.02

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free