Discharge Coefficients of Standard Spillways at High Altitudes

1Citations
Citations of this article
22Readers
Mendeley users who have this article in their library.

Abstract

This paper presents an experimental campaign conducted next to the Condoroma dam, in Perú, at 4075 m a.s.l. The tests carried out in this paper were conducted in a 21 m long channel located at the toe of Condoroma dam. The setup consisted of a series of standard profile spillways with a vertical upstream face of up to five different dimensionless heights (P/Hd) ranging from 0.5 to 2. The experimental results indicated that, the P/Hd ratio influences the discharge coefficients in Condoroma, and P/Hd ≥ 1 values are recommended for the design of the spillway profile. In addition, for all the P/Hd ratios studied, the discharge coefficients adjusted to the Condoroma altitude were lower than those reported by classical formulations used in conventional spillway designs. Finally, a generalized equation is proposed to estimate the discharge coefficient for standard spillways located in dams at similar elevations above sea level.

Cite

CITATION STYLE

APA

Rendón, V., Sánchez-Juny, M., Estrella, S., Sanz-Ramos, M., Rucano, P., & Huarca Pulcha, A. (2024). Discharge Coefficients of Standard Spillways at High Altitudes. Designs, 8(2). https://doi.org/10.3390/designs8020022

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free