A reusable perfused human cadaver model for surgical training: An initial proof of concept study

Abstract

Objectives: Today's surgical trainees have less exposure to open vascular and trauma procedures. Lightly embalmed cadavers may allow a reusable model that maximizes resources and allows for repeat surgical training over time. Methods: This was a three-phased study that was conducted over several months. Segments of softembalmed cadaver vessels were harvested and perfused with tap water. To test durability, vessels were clamped, then an incision was made and repaired with 5-0 polypropylene. Tolerance to suturing and clamping was graded. In a second phase, both an arterial-synthetic graft and an arterial-venous anastomosis were performed and tested at 90 mmHg perfusion. In the final phase, lower extremity regional perfusion was performed and vascular control of a simulated injury was achieved. Results: Seven arteries and six veins from four cadavers were explanted. All vessels accommodated suture repair over 6 weeks. There was minor leaking at all previous clamp sites. In the anastomotic phase, vessels tolerated grafting, clamping, and perfusion without tearing or leaking. Regional perfusion provided a life-like training scenario. Conclusions: Explanted vessels of soft-embalmed cadavers show adequate durability over time with realistic vascular surgery handling characteristics. This shows promise as initial proof of concept for a reusable perfused cadaver model. Further study with serial regional and whole-body perfusion is warranted.