Photopolymerized films with zno and doped zno particles used as efficient photocatalysts in malachite green dye decomposition

Abstract

Zinc oxide and zinc oxide doped with tin oxide (ZnO-SnO2) particles were synthesized and successfully incorporated into a polymeric matrix by the photopolymerization reaction in the presence of Irg819 as the photoinitiator. The obtained samples were investigated by means of XRD, ESEM/EDX, TEM, FTIR, and Raman spectroscopy. The ZnO particles were obtained in the formof rods agglomerated in flower (or star) structures with lengths of 2-4 μm and widths between 30 and 100 nm, while ZnO-SnO2 samples evolved in the form of cubes, with sides of 350 nm. The prepared composite films with ZnO and ZnO-SnO2 particles were tested in the photocatalytic degradation of malachite green (MG) dye. While the ZnO-based composite film showed a fairly high photocatalytic activity, the hybrid film containing ZnO doped with SnO2 displayed 100% photocatalytic activity after only 45 min of irradiation, being among the most efficient photocatalysts known for MG degradation. In addition, the recycling tests demonstrated that this film displayed high stability during the photocatalysis reaction since no decrease in the photocatalytic performance was noticed after the first three cycles, indicating its suitability for dyes removal and wastewater purification.