The performance of PCD tools in high-speed milling of Ti6Al4V

Abstract

Tool performance of conventional tools is poor and a major constraint when used in milling titanium alloys at elevated cutting speeds. At these high cutting speeds, the chemical and mechanical properties of Ti6Al4V cause complex wear mechanisms. In this paper, a fine-grain polycrystalline diamond (PCD) end mill tool was tested, and its wear behavior was studied. The performance of the PCD tool has been investigated in terms of tool life, cutting forces, and surface roughness. The PCD tool yielded longer tool life than a coated carbide tool at cutting speeds above 100 m/min. A slower wear progression was found with an increase in cutting speeds, whereas the norm is an exponential increase in tool wear at elevated speeds. Observations based on scanning electron microscope (SEM) and energy dispersive spectroscopy (EDAX) analysis suggest that adhesion of the workpiece is the wear main type, after which degradation of the tools accelerates probable due to the combined effect of high temperature degradation coupled with abrasion. © 2010 The Author(s).