Silicon-based anode with high capacity and performance produced by magnesiothermic coreduction of silicon dioxide and hexachlorobenzene

Abstract

Silicon (Si) has been considered as a promising anode material because of its abundant reserves in nature, low lithium ion (Li) intercalation/de-intercalation potential (below 0.5 V vs. Li/Li) and high theoretical capacity of 4200 mA h/g. In this paper, we prepared a silicon-based (Si-based) anode material containing a small amount of silicon carbide by using mag-nesiothermic coreduction of silica and hexachlorobenzene. Because of good conductivity of silicon carbide, the cycle per-+ + formance of the silicon-based anode materials containing few silicon carbide is greatly improved compared with pure silicon. The raw materials were formulated according to a silicon-carbon molar ratio of 10:0, 10:1, 10:2 and 10:3, and the obtained products were purified and tested for their electrochemical properties. After 1000 cycles, the specific capacities of the materials with silicon-carbon molar ratios of 10:0, 10:1, 10:2 and 10:3 were still up to 412.3 mA h/g, 970.3 mA h/ g, 875.0 mA h/g and 788.6 mA h/g, respectively. Although most of the added carbon reacted with silicon to form silicon carbide, because of the good conductivity of silicon carbide, the cycle performance of silicon-based anode materials was significantly better than that of pure silicon.