Solution processing route to multifunctional titania thin films: Highly conductive and photcatalytically active Nb:TiO2

104Citations
Citations of this article
123Readers
Mendeley users who have this article in their library.
Get full text

Abstract

This paper reports the synthesis of highly conductive niobium doped titanium dioxide (Nb:TiO2) films from the decomposition of Ti(OEt)4 with dopant quantities of Nb(OEt)5 by aerosol-assisted chemical vapor deposition (AACVD). Doping Nb into the Ti sites results in n-type conductivity, as determined by Hall effect measurements. The doped films display significantly improved electrical properties compared to pristine TiO2 films. For 5 at.% Nb in the films, the charge carrier concentration was 2 × 1021 cm-3 with a mobility of 2 cm2 V-1 s-1. The corresponding sheet resistance is as low as 6.5 Ω sq-1 making the films suitable candidates for transparent conducting oxide (TCO) materials. This is, to the best of our knowledge, the lowest reported sheet resistance for Nb:TiO 2 films synthesized by vapour deposition. The doped films are also blue in colour, with the intensity dependent on the Nb concentration in the films. A combination of synchrotron, laboratory and theoretical techniques confirmed niobium doping into the anatase TiO2 lattice. Computational methods also confirmed experimental results of both delocalized (Ti 4+) and localized polaronic states (Ti3+) states. Additionally, the doped films also functioned as photocatalysts. Thus, Nb:TiO2 combines four functional properties (photocatalysis, electrical conductivity, optical transparency and blue colouration) within the same layer, making it a promising alternative to conventional TCO materials. Solution processing of Nb:TiO2 has presented many challenges to the materials community. Nb:TiO2 made by solution processing has been consigned to sensor/catalysis applications. Here, a solution route is presented to highly conductive and photocatalytically active Nb:TiO2 films. A blue color is observed for the niobium doped films with XPS and computational methods showing a stable localized Ti3+ state at the anatase surface compared to the bulk. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Cite

CITATION STYLE

APA

Bhachu, D. S., Sathasivam, S., Sankar, G., Scanlon, D. O., Cibin, G., Carmalt, C. J., … Basahel, S. N. (2014). Solution processing route to multifunctional titania thin films: Highly conductive and photcatalytically active Nb:TiO2. Advanced Functional Materials, 24(32), 5075–5085. https://doi.org/10.1002/adfm.201400338

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free