A Study of Fit and Friction Force as a Function of the Printing Process for FFF 3D-Printed Piston–Cylinder Assembly

Abstract

Current 3D printing processes for polymer material extrusion are limited in their accuracy in terms of dimension, form, and position. For precise results, post-processing is recommended, like with assembled parts such as pistons and cylinders wherein axial mobility is desired with low friction force and limited radial play. When no post-processing step of the printed parts is accomplished, the fit and the friction force behavior are strongly dependent on the process performances. This paper presents a study on parameters of significance and their effects on sliding and running fits as well as their friction forces for fused filament fabrication of such assemblies. A series of experiments were performed with multiple factors and levels, including the position or layout of printed objects, their layer thickness, the material used, the use of aligned or random seam, and the printer type. Piston–cylinder pairs were printed, measured, assembled, and tested using a tensile test frame. A mathematical model was developed to describe the oscillating friction force behavior observed. This study presents the feasibility and limitations of producing piston–cylinder assemblies with reduced play and friction when using appropriate conditions. It also provides recommendations to obtain and better control a desired running and sliding fit.