Effect of post annealing on spin accumulation and transport signals in Co2FeSi/MgO/ n +-Si on insulator devices

6Citations
Citations of this article
19Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

The post annealing temperature dependence of spin accumulation and transport signals in Co2FeSi/MgO/n+-Si on insulator were investigated. The spin signals were detected using 3- and 4-terminal Hanle, 2-terminal local and 4-terminal nonlocal magnetoresistance measurements. The post annealing temperature (TA) dependence of the magnitude in 3-terminal narrow Hanle signals is nearly constant up to TA < 400°C, however a slight decrease above TA ≥ 400°C is observed. This behavior is consistent with the TA dependence of the magnitude of 4-terminal nonlocal magnetoresistance (MR) signals. The spin polarization estimated from the 3-terminal narrow Hanle signals and the magnitude of 2-terminal local MR signals show a slight improvement with increasing post annealing temperature with a peak at around 325°C and then start reducing slowly. The slight increase in the spin signal would be due to high spin polarization of Co2FeSi as a result of structural ordering. The 2-terminal local MR signals do not vary significantly by annealing between as-deposited and TA = 400°C, indicating the robustness of our device. This result would be useful for future Si spintronics devices.

Cite

CITATION STYLE

APA

Tiwari, A., Inokuchi, T., Ishikawa, M., Sugiyama, H., Tezuka, N., & Saito, Y. (2016). Effect of post annealing on spin accumulation and transport signals in Co2FeSi/MgO/ n +-Si on insulator devices. AIP Advances, 6(7). https://doi.org/10.1063/1.4960210

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free