Radio-wave communication with chaos

15Citations
Citations of this article
13Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

Chaotic signals require very wide bandwidth to be transmitted in a practical channel, which is difficult for the practical transducer or antenna to convert such a broadband signal. To address this problem, in thiswork, Chaotic Shape-forming Filter (CSF) is used to obtain the baseband signal, and the corresponding matched filter is used at the receiver to maximize the signal-To-noise ratio. At the same time, the symbol judgment threshold determined by the chaos properties is used to reduce the Inter-Symbol Interference (ISI) effect. Simulations and virtual channel experiments show that the radio-wave communication system using chaos is inferior to the conventional radio-wave communication system using Square Root Raised Cosine (SRRC) shape-forming filter in a single path channel. This is because SRRC eliminates ISI in single path, but CSF does not. However, the chaos-based communication with anti-multipath decoding algorithm shows significantly better Bit Error Rate (BER) performance than the traditional communication system using SRRC and a minimum mean square error (MMSE) channel equalization in a multipath channel. This work shows the potential application prospect of chaos-based communication in future 5G or 6G engineering communication systems.

Cite

CITATION STYLE

APA

Bai, C., Ren, H. P., Zheng, W. Y., & Grebogi, C. (2020). Radio-wave communication with chaos. IEEE Access, 8, 167019–167026. https://doi.org/10.1109/ACCESS.2020.3022632

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free