Highly sensitive impact sensor based on PVDF-TrFE/Nano-ZnO composite thin film

Abstract

A thin film of polyvinylidene fluoride-trifluoroethylene (PVDF-TrFE) has good flexibility and simple preparation process. More importantly, compared with PVDF, its piezoelectric β-phase can be easily formed without mechanical stretching. However, its piezoelectricity is relatively lower. Therefore, at present, PVDF-TrFE is always compounded with other kinds of piezoelectric materials to solve this problem. The effect of nano-ZnO doping amount on the sensing characteristics of the piezoelectric films was studied. PVDF-TrFE/nano-ZnO films with different nano-ZnO contents were prepared by spin coating process and packaged. The dispersion of nano-ZnO dopants and the crystallinity of β-phase in piezoelectric films with different nano-ZnO contents were observed by scanning electron microscopy and X-ray diffraction, and the piezoelectric strain constants and dielectric constants were measured, respectively. The effect of different nano-ZnO contents on the output performance of the piezoelectric sensor was obtained by a series of impact experiments. The results show that the piezoelectric strain constant and dielectric constant can be increased by doping nano-ZnO in PVDF-TrFE. Moreover, the doping amount of nano-ZnO in PVDF-TrFE is of great significance for improving the piezoelectric properties of PVDF-TrFE/nano-ZnO thin films. Among the prepared piezoelectric films, the output voltage of PVDF-TrFE/nano-ZnO piezoelectric sensor with 7.5% nano-ZnO doping amount is about 5.5 times that of pure PVDF-TrFE. Thus, the optimal range of the doping amount for nano-ZnO is about 4-10%.