Development and Testing of the Mars Rover Mobility Platform for Educational and Research Purposes

Abstract

Mars exploration has a long history, but there were only four roving vehicles which successfully operated on its surface (e.g. [1]). Main reasons for this are the mission cost and complexity. This paper describes a Mars Rover Mobility Platform for educational and research purposes developed at Kingston University of London. This platform utilises off-the-shelf components to minimise the cost of the project, and is designed to allow for future improvement. The rover is targeted to meet university research and educational objectives. This paper describes the design, manufacturing and control system of a robotic vehicle. The emphasis of this paper is the implementation of the control system. The investigation in locomotive subsystem and its traction performance was done [4]. The rover was manufactured in-house and its manufacturing method and its main components will be described. The control of the vehicle was done using python programming language and implemented on Raspberry Pi 2B+ controller. The communication was done via Wi-Fi using socket connection stream to identify the TCP/IP of the server and connect to the client. Finally, the testing operation was conducted by producing a qualitative comparison between the actual performance and the specified requirements. The rover design reported here achieved climbing capability for the slopes of 23 o , the turning radius of zero degrees. The final mass of the rover is 18 kg including allowance for the payload. The rover is able to reach a velocity of 5 cm/s.