Composite girders with partial restraints: a new approach

Abstract

Most designs for buildings with steel frames are based on girders with simple connections. To eliminate the problems associated with traditional construction (such as deep and heavy girders and large deflections during construction) structural engineers have been searching for a new design system for a long time. The stub girder system is one example of such efforts. However, the stub girder system proved to be uneconomical for most common buildings. A new and different approach to composite steel/concrete designs was undertaken by the writer resulting in light building frames and cost savings. This new design system is called partial Restraint Girder System (″RGS″). In traditional designs, the engineer determined the building's moment diagram from a moment distribution or stress analysis. In the RGS method, the Structural Engineer can control the maximum and minimum values of moment on the moment diagram (the governing design values) from the outset to fit his design, by establishing the amount of restraint. Although composite girders with partial restraints improve the moment resistance of composite girders significantly, such design is commonly ignored and the codes of practice give no guidance as to procedures that might take advantage of the improved properties.