Sol–gel approach for design of pt/al2 o3-tio2 system—synthesis and catalytic tests

Abstract

Al2 O3-TiO2 systems with Ti:Al 0.1, 0.5 and 1.0 molar ratio obtained by the sol–gel method have been used as a platinum support. As a precursor of alumina gel, aluminum isopropoxide has been chosen. Titanium tert-butoxylate was applied to obtain titania gel and hexachloroplatinic acid was applied as a source of platinum. The systems have been characterized by the following meth-ods: thermogravimetric analysis (TGA), Fourier transformation infrared spectroscopy (FTIR), X-ray powder diffraction (XRPD), low-temperature nitrogen adsorption–desorption isotherms (BET, BJH), temperature-programmed reduction with hydrogen (TPR-H2 ) and hydrogen chemisorption. Reactions of toluene to methylcyclohexane and selective o-chloronitrobenzene (o-CNB) to o-chloroaniline (o-CAN) hydrogenation were used as the tests of systems’ catalytic activity. The application of Al2 O3-TiO2 as a support has enabled the obtaining of platinum catalysts showing high activities for hydrogenation of toluene and selective hydrogenation of o-chloronitrobenzene to o-chloroaniline in the liquid phase. The highest activity in both reactions has been found for Pt/Al2 O3-0.5TiO2 catalyst and the highest selectivity for Pt/Al2 O3-. The activity of Pt/Al2 O3-TiO2 catalysts was higher than that of alumina-supported ones.