Symmetric Step-Apodized Distributed Feedback Fiber Laser with Improved Efficiency

Abstract

We propose and demonstrate a symmetric step-apodized distributed feedback (DFB) fiber laser, which has an improved efficiency and a narrow linewidth. This special DFB laser cavity is based on a unique symmetric step-apodized π-phase-shifted fiber Bragg grating (FBG) directly inscribed in a heavily erbium-doped fiber. The symmetric step-apodized phase-shifted grating is equivalent to a weak uniform phase-shifted FBG embedded in a pair of strong FBGs, and this design could increase the effective cavity length of a DFB fiber laser. Moreover, the symmetric step-apodized DFB laser cavity proposed in this work has a phase shift located in the cavity center. It could simplify the design process significantly due to the symmetry in the laser cavity. Experimental results show that the slope efficiency of a symmetric step-apodized DFB fiber laser could be increased to 1.06%, which is significantly higher than that of a uniform DFB fiber laser (i.e., 0.45%) under the same cavity length and pump conditions. In addition, the proposed DFB fiber laser exhibits a high stability. The fluctuations in lasing wavelength and output power were less than 12 pm (corresponding to a frequency shift of 1.49 GHz) and 0.13 dB within 24 h, respectively. Moreover, the full-width at half-maximum linewidth of the symmetric step-apodized DFB fiber laser was ∼2.6 kHz, measured by the delayed self-heterodyne method with a 50-km fiber delayed line. As such, the proposed symmetric step-apodized DFB fiber laser could potentially be used as high-performance light source for fiber-optic sensors or coherent optical communication systems.