Plasma-Assisted Gasification of Cellulose via Dielectric Barrier Discharge

Abstract

The gasification of cellulose typically requires high temperatures (>600 °C) due to the thermal stability of levoglucosan, a major intermediate formed during pyrolysis. In this study, we investigated the gasification behavior of cellulose by combining infrared (IR) heating with low-power dielectric barrier discharge (DBD) plasma treatment. Cellulose filter paper was first pyrolyzed using localized IR irradiation (2 kW for 30 s), generating mist-like volatile products including levoglucosan. These volatiles were then exposed to DBD plasma (16–64 W for 1 or 3 min) under Ar flow. Despite the relatively low estimated gas temperatures below 240 °C in the plasma region, gas yields, including H2 and CO, increased markedly with discharge power, reaching up to 72.6 wt% at 64 W for 3 min—more than four times that obtained with IR heating alone. These results indicate that DBD plasma facilitates the gasification of pyrolysis volatiles under significantly lower temperature conditions than those required in conventional thermal gasification. This approach may offer a route toward low-temperature biomass gasification with reduced tar, coke, and clinker formation.