Influence of Different Surface Texture Parameters on the Contact Performance of Piston Ring-Sleeve Friction Pair of Hydraulic Cylinders

Abstract

The surface texture, a major way to decrease friction and wear of the cylinder-piston ring friction pair, was conducted on cylinder-piston ring friction pair specimen using the orthogonal experimental design method to investigate the effect of different texture parameters (size, depth, shape, and surface density) of the friction and wear characteristics. Through simulation analysis, the texture parameters that affect the friction and wear characteristics are obtained. Using the evaluation method of friction coefficient and mass wear rate, the influence sequence and optimal values of texture parameters that affect friction and wear characteristics are obtained through range analysis. The results show that, after surface texture treatment under mixed lubrication conditions, the friction characteristics of the friction pair have changed and the friction coefficient and friction and wear rate have been significantly reduced. The results show that the triangular texture has a good antifriction effect, the texture depth is deepened, and the surface density and the size increases have a positive effect on the improvement of friction and wear. An ultra-depth microscope was used to observe the wear morphology of the friction and wear tests. The results show that the weakening of the third body wear by the texturing treatment and the maintenance of oil lubrication are the main reasons for reducing friction and wear.