Fabrication of a Cu2O-Au-TiO2 heterostructure with improved photocatalytic performance for the abatement of hazardous toluene and α-pinene vapors

Abstract

In the current research, a Cu2O-Au-TiO2 heterostructure was fabricated via a step-wise photodeposition route to determine its possible application in the photocatalytic oxidation of hazardous vapors. The results of electron microscopy and X-ray photoelectron spectroscopy confirm the successful fabrication of the Cu2O-Au-TiO2 heterostructure. Strong absorption in the visible region, along with a slight red-shift in the absorption edge, was observed in the UV–vis diffuse reflectance spectrum of Cu2O-Au-TiO2 composite, which implies that the composite can generate a greater number of photoexcited charges necessary for photocatalytic reaction. Toluene and α-pinene, as common gas contaminants in the indoor atmosphere, were employed to assess the photooxidation efficiency of the Cu2O-Au-TiO2 composite. Importantly, photocatalytic activity results indicate that the Cu2O-Au-TiO2 composite showed excellent photodegradation performance compared to pure TiO2 and Cu2O-TiO2 and Au-TiO2, where photocatalytic efficiency was approximately 92.9% and 99.9% for toluene and α-pinene, respectively, under standard daylight illumination. The increased light-harvesting capacity and boosted separation efficiency of electron-hole pairs were mainly accountable for improved degradation performance of the Cu2O-Au-TiO2 composite. In addition, the degradation efficiencies for toluene and α-pinene by the Cu2O-Au-TiO2 composite were also examined under three different light sources: 0.32 W white, blue and violet LEDs. The findings of this work suggested a great promise of effective photooxidation of gas pollutants by the Cu2O-Au-TiO2 composite.