Recovery of Demolished House Rocks from Construction and Demolition Waste with Water Jigs

Abstract

The European Union (EU) is responsible for generating quantities ranging from 310 to almost 700 million tons of construction and demolition waste (CDW) per year. Consisting of over 70% inert material (concrete, ceramics, plaster, bricks, and rocks), CDW can be recycled for various uses, and studies on the concentration of the materials of interest are necessary to improve the management of this material and reduce waste. In CDW recycling plants in Spain, there is a significant presence of limestone from old houses (a common material used in civil construction before new construction materials and technologies emerged) that were demolished and mixed with CDW that can be recovered for use as aggregates in concretes with process density concentration processes such as water jigging. The jigging process is based on the difference in density between materials, allowing the concentration of the densest material at the bottom of the jig. Concrete, conventional construction bricks, and rocks from old houses were taken separately and then were crushed and mixed based on binary and ternary tests, and each test was performed in this study by applying the jigging separation method. The physical characterization tests of these materials was carried out to observe the jigging performance in the concentration of rocks as well as the aggregates present in concrete. Binary tests (with two different materials) and ternary tests (with three different materials) were carried out to analyze the concentration of particles with a density greater than 2.55 g/cm3. The efficiency of jigging in the concentration of these materials was proven, and products were generated with more than 70% recovery of this material, with a concentration comprised of more than 95% rocks and concrete.