Control of crossflow-vortex-induced transition by unsteady control vortices

Abstract

The fundamental mechanisms of a hitherto unstudied approach to control the crossflow-induced transition in a three-dimensional boundary layer employing unsteady control vortices are investigated by means of direct numerical simulations. Using a spanwise row of blowing/suction or volume-force actuators, subcritical travelling crossflow vortex modes are excited to impose a stabilizing (upstream) flow deformation (UFD). Volume forcing mimics the effects of alternating current plasma actuators driven by a low-frequency sinusoidal signal. In this case the axes of the actuators are aligned with the wave crests of the desired travelling mode to maximize receptivity and abate the influence of other unwanted, misaligned modes. The resulting travelling crossflow vortices generate a beneficial mean-flow distortion reducing the amplification rate of naturally occurring steady or unsteady crossflow modes without invoking significant secondary instabilities. It is found that the stabilizing effect achieved by travelling control modes is somewhat weaker than that achieved by the steady modes in the classical UFD method. However, the energy requirements for unsteady-UFD plasma actuators would be significantly lower than for steady UFD because the approach makes full use of the inherent unsteadiness of the plasma-induced volume force with alternating-current-driven actuators. also, the input control amplitude can be lower since unsteady crossflow vortex modes grow stronger in the flow.