Class-III Hydrate Reservoir Depressurization Production Enhancement by Volume Fracturing and Cyclic N2 Stimulation Combination

9Citations
Citations of this article
7Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

The depressurization effect is limited to class III hydrate reservoir recovery. To improve the depressurization effect, a new method of volume-fracturing and cyclic N2 stimulation combination (VFCS) was proposed. The production performance of this method was investigated by using numerical models based on reservoir parameters of the SH7 hydrate site in the South China Sea. The results show that (1) VFCS can greatly enhance the production performance with the average CH4 production rate being approximately 2.85 times higher than that of pure depressurization. This method combines the effects of volume fracturing and cyclic N2 stimulation by improving the seepage environment and further reducing the CH4 partial pressure in the gas phase. (2) High reservoir permeability, medium hydrate saturation, large volume-fracturing scale, low bottom-hole pressure, and high N2 injection amount can increase CH4 production by VFCS. (3) Although VFCS has the largest CH4 production volume and the highest hydrate dissociation degree among the studied production strategies, the reservoir temperature drop is significant by VFCS and future studies can be focused on the external heat supply to the reservoir to further improve the production.

Cite

CITATION STYLE

APA

Xia, Z., Wang, X., & Ren, W. (2023). Class-III Hydrate Reservoir Depressurization Production Enhancement by Volume Fracturing and Cyclic N2 Stimulation Combination. ACS Omega, 8(50), 47678–47689. https://doi.org/10.1021/acsomega.3c05923

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free