Developments in seismic design of tall buildings: preliminary design of coupled core wall systems

Abstract

Performance-based seismic engineering has brought new dimensions to tall building design, leading to a major transformation from the prescriptive/linear strength-based approach to the explicit non-prescriptive/nonlinear deformationbased design approach. In this context, current tall building seismic design practice is based on a well-established design methodology, which starts with a preliminary design followed by two performance evaluation stages. In this methodology, preliminary design represents the critical phase of the tall building design where all structural elements have to be preliminarily proportioned and reinforced for the subsequent performance evaluation stages. However, there are several problems inherent in the existing preliminary design practice. Preliminary design based on linear analysis could lead to unacceptable sizing and reinforcing of the main structural elements of tall buildings. In particular, linear preliminary design procedures applied to coupled core wall systems would most likely lead to an overdesign of coupling beams with inappropriate and heavily congested reinforcement requirements. In addition, linear analysis with reduced seismic loads may result in under-designed wall elements especially in terms of their shear strength. Simple procedures based on first principles have been developed to estimate base overturning moment capacity, total coupling shear capacity and overall ductility demand of the coupled core wall systems, which can be efficiently used in the preliminary seismic design of tall buildings.