Switched-beam array of dielectric rod antenna with RF-MEMS switch for millimeter-wave applications

8Citations
Citations of this article
6Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

A conformal dielectric rod antenna array with operating frequency of 11.2 GHz is investigated, designed, and measured. This antenna array is combined with a single pole double throw radio frequency microelectromechanical systems (RF-MEMS) switch to realize switched-beam performance. Moreover, this antenna array exhibits uniform radiation performance for different scan angles with no grating lobes. The characterization and measurement of the antenna system have been performed. The measured radiation pattern of the antenna in the anechoic chamber is in good agreement with the simulated antenna pattern. The measured antenna with the RF-MEMS switch has 13.5 dBi realized gain, -15 dB sidelobe level, 22° half-power beamwidth, and 7.3% (fractional) bandwidth (or 800 MHz) at 11.2 GHz. Key Points The coupling between the array element is sufficiently low Uniform antenna performance is observed for every scan angle High-gain and low sidelobe level antenna is realized

Author supplied keywords

Cite

CITATION STYLE

APA

Rousstia, M. W., Reniers, A. C. F., & Herben, M. H. A. J. (2015). Switched-beam array of dielectric rod antenna with RF-MEMS switch for millimeter-wave applications. Radio Science, 50(3), 177–190. https://doi.org/10.1002/2014RS005471

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free