Nutrient leaching and end product accumulation in plastic composite supports for L-(+)-lactic acid biofilm fermentation

Abstract

Investigations on the leachate bioavailability, leaching rate, and lactic acid accumulation properties of plastic composite supports (PCS) were essential for large-scale or long-term lactic acid fermentation. Leachates from PCS and polypropylene discs (controls) were analyzed by the micro- Kjeldahl method; by absorbances at 260, 275, and 280 nm; and by bioassays with Lactobacillus casei subsp. rhamnosus (ATCC 11443). The amount of leached nitrogen in a 20-ml initial soaking solution had a high correlation with the soaking solution's cell density (r = 0.87) and absorbance at 260 nm (r = 0.95). Leaching rates of various PCS were evaluated by 20 20-ml simulated repeated-batch fermentations (RBF). PCS with only yeast extract as the minor agricultural ingredient had a high leaching rate and leached out 51 to 60% of the total nitrogen during the first RBF. PCS blended with dried bovine albumin, dried bovine erythrocytes, and/or soybean flour had slowed nutrient leaching (20 to 30% of the initial leached nitrogen). Hence, they could still maintain 1 g of lactic acid per liter and measurable cell density (absorbance at 620 nm, 0.4 to 0.6) at the 20th 20-ml RBF. Lactic acid accumulation properties of PCS were evaluated by soaking the supports in a 30% lactic acid solution for 72 h at 45°C. The lactic acid-soaked supports were rinsed three times and then heat treated (121°C, 15 min) in 15 ml of deionized water. The results showed that lactic acid accumulation in PCS was mainly due to absorption and had no correlation with lactic acid production or biofilm formation.