Heterogeneous Fenton Oxidation Using Magnesium Ferrite Nanoparticles for Ibuprofen Removal from Wastewater: Optimization and Kinetics Studies

36Citations
Citations of this article
69Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

In this study, the catalytic properties of Fenton-like catalyst based on magnesium ferrite nanoparticles for IBP degradation were examined. Structural and morphological studies showed the low crystallinity and mesoporous structure for the catalyst obtained via a glycine-nitrate method. The influences of catalyst dosage, oxidant concentration, and solution pH on the pollutant degradation were investigated. The pseudo-first-order model describes kinetic data, and under optimal condition (catalyst dose of 0.5 g L-1, H2O2 concentration of 20.0 mM, and pH of 8.0), apparent rate constant reached 0.091 min-1. It was shown that Fenton reaction was mainly induced by iron atoms on the catalyst surface, which is supported by very low iron leaching (up to 0.05 mg L-1) and high catalytic activity at neutral solution pH (6.0-8.0). It was found that the IBP mineralization onto magnesium ferrite catalyst was rapid and reached up to 98-100% within 40 min. Thus, prepared magnesium ferrite nanoparticles can be used as an effective Fenton-like catalyst for the IBP degradation from wastewater.

Cite

CITATION STYLE

APA

Ivanets, A., Prozorovich, V., Roshchina, M., Grigoraviciute-Puroniene, I., Zarkov, A., Kareiva, A., … Sillanpaa, M. (2020). Heterogeneous Fenton Oxidation Using Magnesium Ferrite Nanoparticles for Ibuprofen Removal from Wastewater: Optimization and Kinetics Studies. Journal of Nanomaterials, 2020. https://doi.org/10.1155/2020/8159628

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free