Cold-formed steel Z-purlins with overlapping at the intermediate supports ensures the continuity of the bending moment. A continuous beam with two equal spans of 6 m is investigated under gravity loading using the finite element method. The numerical model includes the beneficial interaction between the Z-purlins and the trapezoidal sheeting. Finite element results show that the screw spacing and sheeting thickness has a limited influence on the resistance of the member. The effect of the overlapping length and detailing of the connection is studied through a parametric study. Six overlaps varying from 100mm to 1200mm (1.6% to 20% of one span) capture the change of the failure mode from the overlap edge to the support region of the purlin. The connection detailing is studied considering multiple bolt/screw patterns. The detailing and length of the overlap connection has a major influence on the moment distribution and consequently on the failure mode. The detailed finite element analysis shows that assuming the beam connection as continuous in 1D beam models lead to an unrealistic bending moment distribution and failure mode. Connecting the bottom flange using screws improves the overall load carrying capacity of the beam especially for short overlap lengths. The increase in resistance is attributed to the restraining effect on the free flange which fails due to distortional buckling.
CITATION STYLE
Gîrbacea, I. A., & Ungureanu, V. (2021). Finite Element Analysis of Overlapped Z-Purlins Restrained by Sheeting. IOP Conference Series: Materials Science and Engineering, 1203(3), 032077. https://doi.org/10.1088/1757-899x/1203/3/032077
Mendeley helps you to discover research relevant for your work.