Impact of Membrane Types and Catalyst Layers Composition on Performance of Polymer Electrolyte Membrane Fuel Cells

Abstract

Performance of a low temperature polymer electrolyte membrane fuel cell (PEMFC) is highly dependent on the kind of catalysts, catalyst supports, ionomer amount on the catalyst layers (CL), membrane types and operating conditions. In this work, we investigated the influence of membrane types and CL compositions on MEA performance. MEA performance increases under all practically relevant load conditions with reduction of the membrane thickness from 50 to 15 μm, however further decrease in membrane thickness from 15 to 10 μm leads to reduction in cell voltage at high current loads. A thick anode CL is found to be beneficial under wet operating conditions assuming more pore space is provided to accommodate liquid water, whereas under dry operating conditions, an intermediate thickness of the anode CL is beneficial. When studying the impact of catalyst layer thickness, too thin a catalyst layer again shows reduced performance due to increased ohmic resistance ruled out the performance of the MEAs which have identical Pt crystallite sizes on the cathode CLs i. e. the thinnest the cathode CL, the highest the voltage were achieved at a defined current load. Adaptation of the operating conditions is highly anticipated to achieve the highest MEA performance.