Characteristics of high quality ZnO thin films deposited by pulsed laser deposition

296Citations
Citations of this article
122Readers
Mendeley users who have this article in their library.
Get full text

Abstract

Thin films of ZnO have been deposited on glass and silicon substrates by the pulsed laser deposition technique employing a KrF laser (λ=248 nm). The influence of the deposition parameters, such as substrate temperature, oxygen pressure, and laser fluence on the properties of the grown films, has been studied. All the films grown over a rather wide range of deposition conditions were found to be optically transparent, electrically conductive, and c-axis oriented, with the full width at half-maximum (FWHM) of the (002) x-ray reflection line being very often less than 0.25°. Under optimized laser fluence and oxygen pressure conditions, highly c-axis oriented films having a FWHM value less than 0.15°and optical transmittance around 85% in the visible region of the spectrum have been grown at a substrate temperature of only 350°C. These are among the best properties yet reported for ZnO films grown by any technique at such a low temperature. © 1994 American Institute of Physics.

Cite

CITATION STYLE

APA

Craciun, V., Elders, J., Gardeniers, J. G. E., & Boyd, I. W. (1994). Characteristics of high quality ZnO thin films deposited by pulsed laser deposition. Applied Physics Letters, 65(23), 2963–2965. https://doi.org/10.1063/1.112478

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free