Compressibility of water as a function of temperature and pressure

405Citations
Citations of this article
367Readers
Mendeley users who have this article in their library.
Get full text

Abstract

The isothermal compressibility of water from 0 to 100 °C and 0 to 1000 bar has been determined from Wilson's sound velocity measurements which have been normalized to Kell's 1 atm values. The isothermal compressibilities determined from the sound velocities have been fit, with a maximum deviation in compressibility of ±0.016 × 10-6 bar-1, to an extended bulk modulus equation V 0P/ (V0 - Vp) = B + A1P + A2P 2, where V0 and Vp are the specific volume at an applied pressure of zero and P; and B, A1 and A2 are temperature dependent constants. Our specific volume results are in reasonable agreement with the work of Kell and Whalley at low pressures; however, our results at high pressures (1000 bar) disagree by as much as 169 ppm (the average deviation is approximately 115 ppm). A comparison of the compressibilities indicates a parabolic shift in Kell and Whalley's work with a maximum of approximately 0.205 × 10-6 bar-1 at 400 bar and 5 °C. Since the velocity of sound data is extremely reliable ( ±- 0.2 m/sec) and the maximum error in the compressibilities derived from the sound data is within ± 0.016 × 10-6 bar-1, our PVT results based upon the sound data are more accurate than any direct measurements made to date.

Cite

CITATION STYLE

APA

Fine, R. A., & Millero, F. J. (1973). Compressibility of water as a function of temperature and pressure. The Journal of Chemical Physics, 59(10), 5529–5536. https://doi.org/10.1063/1.1679903

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free