Development of epoxy matrix artificial stone incorporated with sintering residue from steelmaking industry

Abstract

The present work is part of an innovation research project aiming to develop artificial stone from industrial wastes. In principle, the project goal is to fabricate artificial stones with improved characteristics to be used as plates for housing and road construction. In this work, the specific industrial residue was an electrostatically precipitated powder obtained from the initial sintering stage of an integrated steelmaking plant. Plates were produce by vacuum vibro-compression of epoxy resin mixed with 80 and 85 wt% of this specific residue. After curing, the plates were characterized for physical parameters and mechanical properties. The microstructural aspect of the finishing surface was analyzed for both novel artificial stones by scanning electron microscopy. The results indicated that the 80% residue incorporated artificial stone is superior to the 85% residue incorporated and markedly stronger than a commercial artificial stone, incorporated with granite residue, with comparable density and water absorption. These characteristics favor the technical substitution of the presently investigated artificial for the commercial stone. In particular, based on wear tests, the residue incorporated artificial stone would be restricted to application as pavement in medium traffic roads.