The technology of rob water treatment becomes clean water by using the combination of electrolysis, filtration, and ozonation methods

Abstract

Coastal residents have difficulty in fulfilling the needs of clean water due to tidal water and tidal water intrusion. Meanwhile, clean water is a crucial component in carrying out activities of daily life. This initiative aims to provide an alternative solution in the form of technology to treat water polluted by saline water into clean water. This initiative used the method of electrolysis, filtration, and ozonation. Electrolysis has functions to remove salt contained and reduce levels of heavy metals while filtration functions to filter out the impurities in the form of solid particles, and ozonation takes a role to kill bacteria. Moreover, the target output of this work is the creation of a prototype by using this technology as a technology that can treat water polluted by saline water into clean water. The parameters assessed from this initiative are physical, chemical, and biological parameters of clean water. The results of the total test of dissolved solids of water before processing were 7130 ppm while it was 2490 ppm after getting treatment. The decreasing total value of dissolved solids is 65.077%, which indicates that the test was successful. The result of an electrical conductivity test of water before processing is 310 mA while after processing is 88.6 mA. The decrease in the current value of 71.419% indicates that the test was successful. The results of the turbidity test of water before processing are 0 FAU while after getting treatment is 0 FAU. The turbidity value remains 0, which indicates the test was successful. The results of the pH test of water before processing were 5.7 while the result after treatment got 6.1. The increase in pH value towards pH 7 (neutral) indicates that the test was successful. The test results of salt and heavy metals (Fe, Cu, Cl, Na, and Pb) of water before processing were 0.073 ppm, 0.07 ppm, 0.17 ppm, 0.04 ppm, and 4.24 ppm while after processing was 0 ppm, 0 ppm, 0.07 ppm, 0.03 ppm, and 1.36 ppm. There was a decrease in Fe 100%, Cu 100%, Cl 58,823%, Na 25%, and Pb 67,924% which showed that the test was successful. Test results for fecal coliform and nonfecal coliform bacteria before processing were 43 MPN / 100 ml and 7 MPN / 100 ml while after processing was 23 MPN / 100 ml and 4 MPN / 100 ml. There was a decrease in the value of fecal coliform bacteria 46.511% and nonfecal coliform 42.857% which showed that the test was successful. The use of electrodes needs to be replaced periodically so that the results of clean water production remain optimal.