Efficiency of Carbonate Precipitation and Removal of Copper and Nickel Ions from their Monocomponent and Two-component Aqueous Solutions

  • Junuzovic H
  • Begic S
  • Selimovic A
  • et al.
N/ACitations
Citations of this article
15Readers
Mendeley users who have this article in their library.

Abstract

The effect of pH and initial concentration on the removal of Cu(II) and Ni(II) ions from their monocomponent and two-component aqueous solutions using Na 2 CO 3 as a chemical precipitation agent was investigated in this paper. Monocomponent aqueous solutions of Cu(II) and Ni(II) ions with their initial concentrations of 50 and 500 mg/L and two-component aqueous solution with initial concentration of 500 mg/L were prepared. The precipitation was carried out by batch method at room temperature by stirring the solution at 300 rpm for 5 minutes, resulting in the formation of precipitates. The resulting precipitate was separated by filtration from the solution. The experiment proved that Na 2 CO 3 is a good agent for removing Cu(II) and Ni(II) ions from their monocomponent water solutions of 50 and 500 mg/L concentration and two-component water solution with initial concentration of each metal 500 mg/L. The percentage of Cu(II) removal was higher at lower pH values compared to Ni(II) removal.

Cite

CITATION STYLE

APA

Junuzovic, H., Begic, S., Selimovic, A., Dozic, A., Cvrk, R., & Ahmetovi, M. (2019). Efficiency of Carbonate Precipitation and Removal of Copper and Nickel Ions from their Monocomponent and Two-component Aqueous Solutions. International Journal For Research in Applied Sciences and Biotechnology, 06(06), 11–15. https://doi.org/10.31033/ijrasb.6.6.3

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free