Influence of Angle Ply Orientation on Tensile Properties of Carbon/Glass Hybrid Composite

Abstract

Hybrid composites are considered materials of great potential for engineering applications. One advantage of hybrid composite materials for the designer is that the properties of a composite can be controlled to a considerable extent by the choice of fibers and matrix and by adjusting the orientation of the fiber. The scope for this tailoring of the properties of the material is much greater, however, when different kinds of fiber orientations are incorporated in the same resin matrix. For the study of potential of these materials, in this work specimens were prepared with different angle ply ori- entation of carbon/glass hybrid with epoxy resin as an adhesive. Three orientations viz 0˚/90˚, 45˚/45˚ and 30˚/60˚ were considered for studies. Mechanical properties such as tensile strength, tensile modulus, & peak load of the hybrid com- posites were determined as per ASTM standards. Vacuum bagging technique was adopted for the fabrication of hybrid specimens. It was observed that angle ply orientation at 0˚/90˚ showed significant increase in tensile properties as com- pared to other orientation. Scanning electron micrographs of fractured surfaces were used for a qualitative evaluation of interfacial properties of woven carbon-glass hybrid composites. These results indicated that carbon-glass hybrid com- posites offered the merits of synthetic fibers.