The fabrication of aspherical microlenses using focused ion-beam techniques

Abstract

Aspheric lenses are the most common method for correcting for spherical aberrations but, in microlens production, highly-controlled lens profiles are hard to achieve. We demonstrate a technique for creating bespoke, highly-accurate aspheric or spherical profile silicon microlens moulds, of almost any footprint, using focused ion-beam milling. Along with this, we present a method of removing induced ion-beam damage in silicon, via a hydrofluoric acid etch, helping to recover the surface's optical and chemical properties. In this paper, we demonstrate that our milled and etched moulds have a roughness of 4.0-4.1. nm, meaning they scatter less than 1% of light, down to wavelengths of 51. nm, showing that the moulds are suitable to make lenses that are able to handle light from UV up to infra-red.Using empirical experiments and computer simulations, we show that increasing the ion-dose when milling increases the amount of gallium a hydrofluoric acid etch can remove, by increasing the degree of amorphisation within the surface. For doses above 3000μC/cm2 this restores previous surface properties, reducing adhesion to the mould, allowing for a cleaner release and enabling higher quality lenses to be made.Our technique is used to make aspheric microlenses of down to 3. μm in size, but with a potential to make lenses smaller than 1. μm.