Large enhanced perpendicular magnetic anisotropy in CoFeB/MgO system with the typical Ta buffer replaced by an Hf layer

163Citations
Citations of this article
169Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

By systematically comparing the magnetic properties of the Ta/CoFeB/Ta and MgO/CoFeB/MgO structures with and without a submonolayer of MgO, Ta, V, Nb, Hf and W inserted in the middle of the CoFeB layer, we have proved that the observed perpendicular magnetic anisotropy (PMA) in Ta/CoFeB/MgO sandwiches is solely originated from the CoFeB/MgO interface with the Ta buffer acting to enhance the CoFeB/MgO interface anisotropy significantly. Moreover, replacing Ta with Hf causes the CoFeB/MgO interfacial PMA further enhanced by 35%, and the CoFeB layer with perpendicular magnetization has a much larger critical thickness accordingly, leaving a wider thickness margin for the CoFeB/MgO-based perpendicular magnetic tunnel junction optimization. Also the sputter deposited thin Hf films are amorphous with lowsurface roughness. These results will ensure the Hf/CoFeB/MgO more promising material system for PMA device development. Copyright 2012 Author(s).

Cite

CITATION STYLE

APA

Liu, T., Cai, J. W., & Sun, L. (2012). Large enhanced perpendicular magnetic anisotropy in CoFeB/MgO system with the typical Ta buffer replaced by an Hf layer. AIP Advances, 2(3). https://doi.org/10.1063/1.4748337

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free