Total and extractable heavy metal, phosphorous and sulfur concentrations in slaker grits from the causticizing process of a pulp mill for use as a soil amendment

Abstract

The utilization of solid residues allows industry to reduce and recycle waste materials and produce beneficial by-products. The total heavy metal concentrations in slaker grits originating from the chemical recovery process of a pulp mill are lower than the current Finnish statutory limit values for fertilizers used in agriculture and in forestry. In addition, slaker grits are strongly alkaline pH (13.1), have elevated total calcium concentration (331 g kg-1; d.w.), contain calcite (CaCO3), as well as a neutralizing value of 39.4% (Ca equivalents, d.w.). Thus, 0.96 tonnes of slaker grits would be required to replace 1 tonne of a commercial ground limestone product. This indicates that slaker grits have great potential as an industrial residue-based fertilizer and liming agent for use in agriculture and forestry. Since, before such use, it is necessary to assess the mobility of elements in the grits, the three-stage BCR sequential extraction procedure was carried out. Results from sequential extractions showed that the partitioning of Mn (47%), Co (47.1%), Ni (43.1%) and S (94%) was highest in the exchangeable fraction, in which acetic acid (CH3COOH) is used as extractant. The partitioning of Fe (96.5%) and Ti (75.6%) was highest in the easily reduced fraction, in which hydroxylamine hydrochloride (NH2OH-HCl) is used as extractant. The partitioning of Cr (90.8%), V (75.4%), Zn (78.3%), Ba (62.1%), Al (99.4%) and P (99.8%) was highest in the oxidizable fraction, in which hydrogen peroxide (H2O2) is first applied to a heated medium (i.e. 85°C) for dissolving organic matter, after which ammonium acetate (NH4COOH) is used as extractant.