Interface Engineering of a NASICON-Type Electrolyte Using Ultrathin CuS Film for Lithium Metal Batteries

3Citations
Citations of this article
5Readers
Mendeley users who have this article in their library.

Abstract

NASICON-type Li1.5Al0.5Ge1.5(PO4)3 (LAGP) is a remarkable solid-state electrolyte due to its high ionic conductivity and excellent air stability. However, the weak LAGP|Li interfacial compatibility (e.g., chemical instability of LAGP with Li metal and lithium dendrite growth) limits its practical application. Herein, an ultrathin CuS layer was fabricated on the surface of the LAGP electrolyte by magnetron sputtering (MS). Then, an in situ Li2S/Cu nano-layer formed via the conversion reaction between CuS and molten Li was constructed at the LAGP|Li interface. The Li2S/Cu nano-layer enables effective hindering of the reduction reactions of LAGP with Li metals and the suppression of lithium dendrite growth. The assembled Li symmetric battery with the Li2S/Cu@LAGP electrolyte shows a promising critical current density (CCD) of 0.6 mA cm−2 and a steady battery operation for over 700 h. Furthermore, the full LiFePO4 battery comprising the Li2S/Cu@LAGP electrolyte shows excellent capacity retention of 94.5% after 100 cycles, providing an appropriate interface modification strategy for all-solid-state Li metal batteries.

Cite

CITATION STYLE

APA

Zhang, S., Liu, D., Zhang, L., Li, J., Zhao, G., Ci, L., & Min, G. (2023). Interface Engineering of a NASICON-Type Electrolyte Using Ultrathin CuS Film for Lithium Metal Batteries. Batteries, 9(4). https://doi.org/10.3390/batteries9040194

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free