Propagation of ultrasonic guided waves in lap-shear adhesive joints: Case of incident a0 Lamb wave

Abstract

This paper deals with the propagation of ultrasonic guided waves in adhesively bonded lap–shear joints. The topic is relevant to bond inspection by ultrasonic testing. Specifically, the propagation of the lowest-order, antisymmetric a0 mode through the joint is examined. An important aspect is the mode conversion at the boundaries between the single-plate adherents and the multilayer overlap. The a0 strength of transmission is studied for three different bond states in aluminum joints, namely a fully cured adhesive bond, a poorly cured adhesive bond, and a slip bond. Theoretical predictions indicate that the dispersive behavior of the guided waves in the multilayer overlap is highly dependent on bond state. Experimental tests are conducted in lap–shear joints by a hybrid, broadband laser/air-coupled ultrasonic setup in a through-transmission configuration. The Gabor wavelet transform is employed to extract energy transmission coefficients in the 100 kHz 1.4 MHz range for the three different bond states examined. The cross-sectional mode shapes of the guided waves are shown to have a substantial role in the energy transfer through the joint.