Adsorptive removal of as(V) from aqueous solution onto steel slag recovered iron – chitosan composite: Response surface modeling and kinetics

Abstract

In the present work iron particles was recovered by dry magnetic separation, from waste steel slag, doped with chitosan for adsorbent prepared, characterized and evaluated for the removal of As(V) from an aqueous solution. The adsorption of As(V) was optimized by using response surface methodology through Box-Behnken design model, which gave high correlation coefficient (R2 = 0.9175), and a predictive model of quadratic polynomial equation. Analysis of variance and Fischer's F-test were used to govern the parameters which interrupt the adsorption of As(V).The adsorbent was characterized by FTIR, XRD and SEM. Optimal conditions, including adsorbent dosage, pH, temperature, initial ion concentration and contact time for the removal of As(V), were found to be 0.8 g, pH 4, 308 K, 10 mg L−1 and 3 h, respectively. Langmuir isotherm model fitted better compared to the Freundlich model having a maximum adsorption capacity of 11.76 mg g−1, a high regression coefficient value of 0.993 and least chi-square value of 0.1959. The process was found to follow monolayer adsorption and pseudo-second-order kinetics. Thermodynamic parameters such as ∆S, ∆H and ∆G indicated the feasibility, spontaneous and endothermic nature of adsorption. Successful regeneration of the adsorbent implies its applicability to the removal of arsenic from real life wastewater.