Capacity evaluation of voided driven piles using embedded data collectors

Abstract

This paper presents an application of a method that will be implemented in the embedded data collector (EDC) system in the near future, to estimate the capacity of driven piles with a combined solid and voided cross section. Data from accelerometers and strain gauges located in the solid sections at both the top and the bottom of a pile are used to independently estimate the pile’s skin friction and tip resistance. Wave propagation along the pile is modeled as a one-dimensional wave equation, with a nonuniform cross section and with nonlinear static skin friction and viscous-damping soil resistances acting along multiple segments of the pile. The static skin friction is extracted by least-squares fitting of computed particle velocities with measured data at both the top and the bottom of the pile. The pile tip is modeled as a nonlinear single degree of freedom with viscous damping. Static tip resistance (nonlinear stiffness-displacement relationship) is extracted by least-squares fitting of the predicted total force and energy with the measured tip data. The new EDC method was applied to four combined solidvoided cross section driven piles with capacities varying from 2800 to 6700 kN. The results of the data evaluated with the new EDC method are consistent with those from the static load tests to within 15%.